Vox wah / Crybaby wah restoration board & DIY resistor transistor capacitor kit.

Description

These
Boards are the
Exact size & hole pattern  found in the
Vox
/ Crybaby
Wahs
& others.. from late 1967 through 1969/70s.
These b
oard holes are 1.3 mm dia. the wiring pins supplied have a slightly larger Dia 1.4mm whi you might want to use a very small drill bit to enlarge the pin holes for easier install of the pins.
DIY 1960s Style Vox wah / Crybaby Wah restoration Board kit. Simple easy to read layout drawing  supplied for proper placement of parts along with a true bypass wire diagram to install in your shell.
Don't forget to check out my other completed wah boards.
You receive the following:
1..:Exact replica 1960s Wah Board.
2...:22uF trop fish caps
2.: .01uF polystyrene caps
1..: Radial cap.
2..: BC108 Transistors W/ vintage correct hfe found in the mid to late 1960s vox wahs,
Transistors may be substituted with a different brand But just as good.
2..:470K       Carbon Comp Resistor
1..:470 ohm
Carbon Comp
Resistor
1..:100K
Carbon Comp
Resistor
1..:68K
Carbon Comp
Resistor
1..:33K
Carbon Comp
Resistor
1..:22K
Carbon Comp
Resistor
1..:10K
Carbon Comp
Resistor
1..:1K5
Carbon Comp
Resistor
1..:1 K
Carbon Comp
Resistor
5.. wiring pins for each board.
When complete it could look like picture #12
Above provides y
ou with everything you need to complete you're board build
excluding the Inductor, All vintage type inductors will mount to this board
along with most modern inductors.
Please any Questions.
Thanks & Enjoy.
Jerry D.