Metal Lube Red Multi-Purpose Grease 14.5 Oz. Cartridge

Description

Metal Lube
Red Multi-Purpose Grease  14.5 Oz. Cartridge
FEATURES:
Good water resistance and washout properties
Able to withstand heavy loads for extended periods of time
Can be used in many agricultural, automotive and industrial applications
Especially good for sliding surfaces and open gears.
BENEFITS:
Rust and oxidation inhibitors
Water resistant
Excellent mechanical stability
Long storage life
Agricultural, automotive and industrial applications
Soft and unctuous, with excellent mechanical and structural stability, with anti-rust / corrosion and anti-wear properties, very resistant to oxidation. Able to withstand high loads and impact pressure, very suitable for bearings that rotate at high speed.
Resists environmental humidity, salt water and washing with water under pressure. It has an exceptional behavior in situations of great external
contamination such as dust, rust, rust, marine environment, etc.
Reduces friction and vibration noise.
It maintains the lubricity above 280ºC / 536ºF and has a freezing point of -20ºC / -4ºF.
Does not affect seals and elastomers. It does not contain molybdenum sulphide or graphite. It does not leave solid waste.
INSTRUCTIONS:
For use in: Precision machinery, electric motor bearings, pump bearings, bearings and differential R / C, automotive, motorcycling, rail, air and sea.
Thanks to the active component of METAL LUBE, this grease can be used as a clutch paste in the mini motorcycle clutch pads, the pads adapt perfectly to the hood, reducing the temperature and preventing the clutch from burning.
Extends life and improves the performance of clutches.
APPLICATION:
A thin layer of grease is applied to the clutch pads, allowed to stand for a minimum of 12 hours so that the pads become hydrated as much as possible. Then the clutch springs are adjusted, leaving them loose for a short run, rolling between 6000-7000 rpm, until the active component of the METAL LUBE grease comes into operation.
(It is possible that during the filming process, white smoke comes out, do not be alarmed, it is completely normal)
Then adjust the clutch springs again and you are ready for use.