GE Inspections MIC-10/MIC-205 Kit Portable Hardness Tester - Olympus Krautkramer

Description

GE MIC-10 Hardness Tester Kit
Stock #200204B
Included with Sale
-GE MIC10 Unit
-GE MIC205 Probe
-Probe Attachment Handle
-Probe cable
-Probe Cylindrical Radius Shoe
-Reference Plate
-Composite Pocket Set
-Calibration Standard
-Hard Carry Case
Specifications:
MIC-10 Ultrasonic Contact Impedance Hardness Tester
The MIC 10 uses the UCI (Ultrasonic Contact Impedance) method for efficient and accurate measurements by electronically measuring the Vickers diamond indent and then displaying the hardness value instantly.  This portable hardness tester can test hard to reach places and can measure in any direction, making it a flexible solution for operators.
Measurements can be viewed as either a single value or an average value and it is easy to edit erroneous values.  The default calibration parameter is fro low and non-alloyed steel but the unit can also be recalibrated to other mateirals.
Quick Hardness Testing Wherever You Wish
As with all other hardness testers from our MICRODUR line, the MIC 10 operates according to the UCI method (Ultrasonic Contact Impedance). This method enables quick and easy measurement: position probe and read off the value. This operational ease is achieved because the Vickers diamond indent in the material's surface is electronically measured and instantly displayed as a hardness value without using the Quick hardness testing wherever you wish.cumbersome optical evaluation of a microscope normally associated with Vickers hardness testing.
The small, handy MIC 10 makes life easy for you: a hardness tester that you can take anywhere - on scaffolds for testing large containers and pipes, or for testing components at any location. The small narrow probes even enable you to make measurements on positions difficult to access, such as tooth flanks or roots of gears. You can measure in any direction, e.g. in the horizontal or overhead positions. The instrument carrier and prop-up stand permits two hand operation, for correct probe positioning and guidance. Easy operation, high performance and unique data processing.
Conforms to ASTM A1038-05 UCI METHOD
What This Small Instrument Can Do
By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials. Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.
Trade Ins:
We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.
Payment terms:
We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to .000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them.
International Buyers:
We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.
Shipping Terms:
Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.
* Your phone number is required for shipping purposes, so please provide it with all correspondence.
* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers.
Packaging:
All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.
Feedback:
We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.
Warranty:
No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs.
Return Policy:
You can return the item for any reason
within three days
. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these im
ages closely before you commit to purchasing the item.
Please call or email us if you have
any questions
about anything that you are uncertain about.
It is critical that you confirm that this item suites your needs within the
three day return policy
period.
Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:
*Return Shipping and insurance of the item to our Store at the following address:
GP-Technical
246 Pooler Parkway Suite E
Pooler, GA 31322
(843)694-6535
*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks.