Fulltone Clyde Deluxe Wah Booster/Buffer 3-Mode Electric Guitar Effect Pedal

Description

Fulltone Clyde Deluxe Wah Booster/Buffer 3-Mode Electric Guitar Effect Pedal
Fulltone Clyde Deluxe Wah Booster/Buffer 3-Mode Electric Guitar Effect Pedal
Up for sale a
Fulltone Clyde Deluxe Wah Booster/Buffer 3-Mode Electric Guitar Effect Pedal!
We are an
Authorized Dealer
of
Fulltone Pedals
!  This effect pedal is
Brand New In The Box /
Never Played With / Never Displayed
and comes with the
Full Manufacturer's Warranty*.
Unit comes in its
Original Packing
.
FULLTONE CLYDE DELUXE WAH
The Deluxe version of the CLYDE wah has all the features that players have come to know and love about the original "CLYDE Standard" but with the following additions:
• 10-step Variable Input Level Control
• True-Bypass w/ bright side-viewable low current Pilot light status indicator
• 3 selectable modes:
◦ Wacked
◦ Jimi" (Clyde Standard)
◦ Shaft
The three-way mode switch and variable input control pot will let you dial in almost any type of wah sound you can imagine. All the way from classic Voodoo Chile... to biting funk... to down and dirty low-end grunt. The CLYDE Deluxe can do it all!
All CLYDE Deluxes sport the most authentic '60's Vox type inductor available, which happens also the quietest... our hand-wound MuMetal shielded Fulltone 500mH inductor and the long-life Fulltone-1 wah pot.
All Clyde's Now Come with Booster/Buffer Control
Wah wah's and Hi-Gain amps/pedals don't work together well... until now, that is. The solution is the new Fulltone Clyde Booster/Buffer, offering up to 20db clean boost and a "Fuzz-Friendly" circuit that (most importantly) doesn't alter the wah's original sound. All the ones I've tried added harsh treble so I developed one that doesn't. All Clyde wah's (both Standard and Deluxe) shipping after today come with this built in switchable Booster/Fuzz-Friendly circuit while still retaining the TrueBypass that Fulltone has always been famous for.
FEATURES:
- 3 way selectable switch:
#1 “Wacked” is reminiscent of the old Colorsound wahs....more of a “woooooowww” with extremely deep bass response. A radical change from
the standard wah tones you’re used to.
#2 “Jimi” is our benchmark recreation of the late ‘60’s Vox Clyde McCoy wah wah as used by you-know-who and Eric Clapton circa Cream.
#3 “Shaft” shifts the whole range up a little to capture the ‘70’s sounds heard on all those funk classics and cheesy movie soundtracks!
- Adjustable IINPUT Level Control:
This knob allows the user to not only fine-tune the desired volume level, but to also overdrive the wah a bit for more overtones and grit.
This control ONLY affects the “on” sound because this pedal has true bypass...finally you can control your wah volume to the nth-degree! LED
status a nice bright glowing red LED to tell you when it’s on.... clean sounding True Bypass when off!
- Switchable JFET Buffer:
This circuit can only be active when your pedal is ON and only when the switch is in the UP position!
Its purpose is two-fold:
A) it allows your wah to work with high-gain amplifiers and Distortion/Fuzz pedals.
B) it offers you up to 12dB of clean Gain-Boost so you jump out of the mix....no more volume loss when the wah is engaged.
I developed this JFET powered circuit to impart no change whatsoever in your Clyde's tone, adding none of the harsh treble you get with other
active wah booster circuits. If you don't need or want it, simply flip the toggle switch to "off" position and you've got your same old CLYDE wah.
Your wah is still True-Bypass, so this circuit does not operate when your pedal is turned off and therefore won't affect other pedals in any way.
This Booster/Buffer is not to be confused with your CLYDE's "Input Level," which simply adjusts the amount of signal that gets into the pedal so you
can overdrive the transistors and Inductor. The Booster/Buffer a no-compromise solution to the age-old problem of wah wah pedals not being
"fuzz friendly."
- Internal Resonance Control:
There is an user adjustable Trimmer inside your lovely new wah that lets you change the gain and bottom-end (Bass) response...it is located on the
circuit board and requires no tools to set. There is room around this trimmer for you to mark your favorite settings using any type of permanent
marker. With the wah plugged in and amp on, turn the wah over and remove the back plate by loosening the 4 rubber feet (note: no tools
required, just turn counter clockwise until they come out) With the wah situated in front of you so that the section of the unit with the battery is
facing you, notice the trimmer with a line pointing to a black arrow (this is my favorite setting) for your particular wah) Now set the trimmer to @ 2
O'clock. that's a stock '60's Vox sound. Turning the trimmer clockwise gets more gain and Bass.
- True Bypass
switching is essential for no tone loss when effect is off. The wah is activated by rocking all the way forward and pressing hard with
your foot. This amount of pressure needed to activate effect can be adjusted for firmer or softer feel....simply contact Fulltone if you have any
questions.
- The Treadle
(part that your foot rests on!) is also adjustable for a firmer or softer feel. This is accomplished by either loosening or tightening the
"nylock" nut on the side of the treadle at the pivot-point where it connects to the bottom housing. It will stay put until you change it the next time.
- Power :
I recommend using a Carbon-Zinc 9 volt battery (included) such as the Eveready "Classic" or "Super Heavy Duty" instead of an Alkaline,
which although they last longer, tend to sound harsh.
*The full manufacturer's warranty is only valid through us.
All our items are fully verified by our pro technician and/or adjusted by our pro luthier before being very carefully packed by our pro service team here at the shop prior to shipment, buy with confidence!
---------------------------------------------------------------------
Canadian customers must pay any applicable sales taxes.
Please refer to the shipping and payments details for prices.
**
Depending on where you are located in Canada, free shipping may not apply to certain heavy or oversize orders.
You can contact us for confirmation before buying.
Shipping cost to USA includes lower 48 states only.
For any other locations, please send us an email for a quote!
We Ship Worldwide!!!
To international buyers (outside Canada):
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Listing and template services provided by inkFrog