AUTOPROFI Oxicat Oxygen Sensor Cleaner + DPF Clean Additive Kit Made in Germany

Description

AUTOPROFI Oxicat Oxygen Sensor Cleaner +
DPF Clean Additive Kit
Made in Germany
DPF Clean
High Power Cleaner for Diesel Particle Filters
Product properties:
• permanent and complete filter cleaning while driving
• no assembling, no disassembling, no standing times, no troubles
• reduces ignition temperature of the soot collected in the diesel particle filter
• no formation of secondary emissions
Product properties:
Suitable for all diesel engines with particle filter, can be mixed with all diesel fuels.
Area of application:
Add to the diesel fuel tank before filling up. Regular use every 3 months is recommended.
Application Consumption:
250 ml for 60 ltr. diesel
Reaction time:
Works during operation
Vehicle chemical products as a solution suited to the current market value
Regenerating the diesel particulate filter: avoid clogging and total failure
If you only use your diesel on short journeys, you risk damaging the diesel particulate filter, which could lead to poor performance and costly repairs. Only preventive measures or a thorough cleaning can prevent the accumulation of ash and soot. Vehicle chemical products offer a good solution for the purpose that suits to the current market value.
Every day city traffic. Always just from one red traffic light to the next one. Many diesel drivers know this scenario and probably its consequences: eventually it will be there, the yellow light, indicating that the diesel particulate filter (DPF) is full. Occasionally, a few hundred miles are sufficient on short urban journeys, so that the soot particle filter is clogged. Because during the short drive time, the engine does not reach the optimum operating temperature that is needed for the filter to regenerate. The consequences are clearly noticeable: The car accelerates worse, the fuel consumption increases and the engine runs more frequently in the emergency program. In the long term, serious damage and costly repairs may occur. At the same time, the clogging of the diesel particulate filter can be prevented for a car lifelong.
Avoid soot accumulations, the processes that take place in a diesel particulate filter: In every DPF, there are two substances that accumulate over time. One is soot, the other ashes. To remove the soot, every diesel vehicle – depending on the model and manufacturer – initiates a filter regeneration every few hundred kilometers. However, 500-550 °C (932-1022 °F) are needed in the exhaust gas flow and these temperatures are not reached on short distances. Thus, it does not come to self-cleaning. "So that the failure of the particulate filter can still be avoided. The recommended vehicle chemical solutions: With the help of certain formulations, it is possible to reduce the ignition temperature of the collected soot, so that it is burned on short distances. Anyone who regularly adds such products to the diesel fuel can prevent the DPF from clogging in short-distance operation.
Remove ash accumulations
While soot problems are easily avoided, ash accumulations are much more difficult to remove. This substance, which accumulates in the DPF over time, can only be removed by dismantling the particulate filter. The filter must be thoroughly rinsed so that the ash is eliminated in all corners. Here, too, there are vehicle chemical solutions that work thoroughly, but still gently." In addition, these applications are significantly cheaper and suit to the current market value than changing the soot particle filter. The installation of a new DPF is very expensive, the vehicle chemical cleaning is much more reasonably priced.
OXICAT - Oxygen Sensor & Catalytic Converter Cleaner
Product properties:
OXICAT is a specially developed high-performance cleaner to sustainably and effectively remove, soot and carbon deposits in the entire exhaust tract, especially in the area of the catalyst, the lambda sensor, the turbocharger and the EGR valve. With regular use, it provides protection against renewed contamination, increases fuel efficiency, optimizes the engine performance and ensures the proper functioning of the catalyst and the lambda sensor. Thus OXICAT supports compliance with the emission limits.
ADVANTAGES
- Removes existing deposits
- Provides protection against heavy dirt with regular use
- Provides the engine performance Restores
- Ensuring the proper operation of the oxygen sensor / catalyst /     turbocharger and the EGR valve
- Prevents or eliminates problems that appear on OBD
WHY OXICAT?
Over time, caused by the continued pollution of the installed in the exhaust system components such as the catalyst, oxygen sensor, turbocharger and EGR valve, a significant increase in fuel consumption and the emission of harmful exhaust gases, such. As carbon monoxide and hydrocarbon. In addition, the engine performance deteriorates noticeably. These problems occur in all vehicles, especially over short distances and for vehicles with exhaust gas re-circulation, direct injection and turbochargers, and in areas with poor fuel quality. Often there is OBD (On Board Diagnostic) error messages that are displayed to the driver of his cockpit.
Area of application:
For use in all petrol and diesel engines and hybrid vehicles. Recommended use in vehicles that did not pass the emissions test (part of the main investigation) due to excessive exhaust emissions.
Application:
Regularly every 3-4 months to admit the fuel tank. Observe mixing ratio!
Consumption:
250 ml or up to 60-80 liter fuel. Mixing Ratio: 1:300
Legal Disclaimer
OXICAT requires the vehicle to reach and sustain the working temperature of the catalytic converter. If the catalytic converter is cracked, damaged or completely clogged, OXICAT will NOT function properly.